Smeg KIV90XT User Manual download pdf (Page 12)

Activated Charcoal Filter (Recirculation Version)

• This cannot be washed or regenerated, and must be changed when all the command LEDs

start to flash, or at least once every 4 months.

Activating the alarm signal

• In Recirculation Version Hoods, the Filter Saturation Alarm must be activated on installation or at

a later date.

• Press and hold the Delay button (T4) on the keypad for 5 seconds and the following will be dis-

played:

• Leds (L1-L2-L3) flash twice – Activated Charcoal Filter saturation alarm ACTIVATED.

• Leds (L1-L2-L3) flash once – Activated Charcoal Filter saturation alarm DEACTI-

VATED.

CHANGING THE ACTIVATED CHARCOAL FILTER

Resetting the alarm signal

• Press any of the buttons except the Light button.

Changing the Filter

• Remove the Metal grease filters.

• Remove the saturated Activated Charcoal filter, as shown in

the figure.

• Fit the new Filter, hooking it into place.

• Replace the Metal grease filters.

Lighting

LIGHT REPLACEMENT

20 W halogen light.

• Remove the snap-on lamp cover by levering it from under the

metal ring, supporting it with one hand.

• Remove the halogen lamp from the lamp holder by pulling

gently.

• Replace the lamp with a new one of the same type, making

sure that you insert the two pins properly into the housings on

the lamp holder.

• Replace the snap-on lamp cover.

1 2 ... 7 8 9 10 11 12

No comments

Smeg KIV90XT User Manual Page 12