Smeg KSE912XU Instruction Manual download pdf (Page 10)

ELECTRICAL CONNECTION

• Remove the cover from the Field Wiring Compartment with a

phillips screwdriver.

• Feed the Power Supply Cable through the electrical knockout.

Connect the Power Supply Cable to the range- hood cable. At-

tach the Power Supply Cable grounding lead to the green screw

provided. Attach the White lead of the power supply to the

White lead of the rangehood with a twist-on type wire connec-

tor. Attach the Black lead of the power supply to the Black

lead of the rangehood with a twist-on type wire connector.

• Replace the cover.

Chimney assembly

Upper exhaust chimney

• Slightly widen the two sides of the upper flue and hook them

behind the brackets 7.2.1, making sure that they are well

seated.

• Secure the sides to the brackets using the 4 screws 12c sup-

plied.

Lower exhaust chimney

• Slightly widen the two sides of the flue and hook them be-

tween the upper flue and the wall, making sure that they are

well seated.

• Fix the lower part laterally to the hood body using the 2 screws

12c supplied.

• On the recirculation version, fit the directional grids 8a – 8b in

their housings making sure that the directional symbols are to-

wards the top and front of the hood. Also make sure that they

are correctly inserted in the connection extension pieces 14.1.

12c

2.1

2.2

7.2.1

12c

Power supply cable

Green

Ground

screw

Ground wire

1 2 ... 5 6 7 8 9 10 11 12 13

No comments

Smeg KSE912XU Instruction Manual Page 10