Smeg KSE912XU User Manual download pdf (Page 9)

Mounting the hood body

• Before attaching the hood body, tighten the two screws Vr lo-

cated on the hood body mounting points.

• Hook the hood body onto the screws 12a.

• Fully tighten support screws 12a.

• Adjust screws Vr to level the hood body.

Note: The Hood body should be secured to wall studs. If neces-

sary, install a wood support behind the dry wall, flush mounted

between 2 studs. This will provide the necessary structure and

support for mounting.

12a

Connections

DUCTED VERSION AIR EXHAUST SYSTEM

When installing the ducted version, connect the hood to the

chimney using a rigid 6” duct.

• Install the damper 10 ø 6”.

• Fix the duct in position using sufficient pipe clamps (not sup-

plied).

DUCTLESS VERSION AIR OUTLET

• Push fit connection 15 onto the hood body outlet.

• Insert the connection extension pieces laterally 14.1 in connec-

tion 15.

• Make sure that the outlet of the extension pieces 14.1 is hori-

zontally and vertically aligned with the chimney outlets. If this

is not the case, adjust the position by either reversing the con-

nection extension pieces 14.1 and then reassemble as described

previously.

• Ensure that the activated charcoal filters have been inserted.

14.115

1 2 3 4 5 6 7 8 9 10 11 12 13

No comments

Smeg KSE912XU User Manual Page 9