Smeg HB96CSS-3 User Manual

22ContentsINSTRUCTIONS FOR THE USER: these contain user advice, descriptionof the commands and the correct procedures for cleaning and maintenanceof t

31Instructions for the installer7.3 Heights for type B installation (full base)B1B2DISTANCES B C L HMINIMUM 630 mm 50 mm 904 mm 750 mmMAXIMUM 650 mm -

32Instructions for the installer7.3.1 Supporting baseMake two openings in the rear part of the base as described in the figurebelow. The left opening

33Instructions for the installer7.4 Mounting for type A installationsOnce the hob is correctly positionedin its support, place the brackets (A)over th

34Instructions for the installer7.5 Mounting for type B installationsOnce the hob is correctly positioned on the supporting base, completethe mounting

35Instructions for the installer7.6 Electrical connectionMake sure that the voltage and capacity of the power line conform to thedata shown on the pla

36Instructions for the installer8. GAS CONNECTIONBefore installation, make sure that the local distribution conditions (nature andpressure of the gas)

37Instructions for the installerInstallation with the flexible hose must be carried out so that the length ofthe piping does not exceed 2 metres fully

38Instructions for the installer9. ADAPTATION TO DIFFERENT TYPES OF GASBefore carrying out the following operations, disconnect the appliancefrom the

39Instructions for the installer9.2 Burner and nozzle characteristics tableRapidRATED HEATING CAPACITY (KW)LPG – G30/G31 28/37 mbarNozzle diameter1/10

40Instructions for the installer10. FINAL OPERATIONS FOR GAS APPLIANCES After making the adjustments described above, reassemble the applianceby follo

23Precautions for use1. INSTRUCTIONS FOR USETHIS MANUAL IS AN INTEGRAL PART OF THE APPLIANCE. IT MUST BE KEPTIN ITS ENTIRETY AND IN AN ACCESSIBLE PLAC

24Instructions for disposal2. INSTRUCTIONS FOR DISPOSAL – OURENVIRONMENTAL CAREOur product's packing is made of non-polluting materials, therefor

25Safety instructions3. SAFETY INSTRUCTIONSREFER TO THE INSTALLATION INSTRUCTIONS FOR THE SAFETYREGULATIONS FOR ELECTRIC OR GAS APPLIANCES AND VENTILA

26Instructions for the User4. KNOW YOUR APPLIANCEAuxiliary Burner (AUX)Semi-rapid Burner (SR)RapidBurner (R)Ultra-rapid Burner (URP)

27Instructions for the User5. USING THE HOB5.1 Gas hobBefore lighting the hob burners, check that the flame-spreader crowns arecorrectly in place with

28Instructions for the User5.2 Practical tips for using the burners For better burner efficiency and to minimise gas consumption, use panswith a flat,

29Instructions for the User6. CLEANING AND MAINTENANCENEVER USE A JET OF STEAM FOR CLEANING THE APPLIANCE.Before performing any operations requiring a

30Instructions for the installer7. INSTALLING THE APPLIANCE7.1 PositioningThis is a class 1 (B2) and 3 (A, B1)appliance.The following operation requi