Smeg PGF95-2 Instruction Manual

Summary 1 INSTRUCTIONS FOR SAFE AND PROPER USE_______________ 21 2 POSITIONING OF THE HOB _______________________________ 23 3 ADJUSTMENT TO DIFF

Instructions for the installer 29 2.6 Gas connection Connection to the gas mains may be made with a rigid copper pipe or with a flexible pipe c

Instructions for the installer 30 3 ADJUSTMENT TO DIFFERENT TYPES OF GAS Before performing any cleaning or maintenance work, unplug theapplian

Instructions for the installer 31 3.2 Burner and nozzle characteristics table Burner Rated heating capacity (kW) LPG – G30/G31 30/37 mbar

Instructions for the installer 32 4 FINAL OPERATIONS After carrying out the above adjustments, remount in reverse order to the instructions given

Instructions for the user 5 USING THE HOB 5.1 Ignition of the burners Before turning on the burners, make sure that the flame-spreader cr

Instructions for the user 34 If the burners turn off accidentally, a safety device will trip after about 20 seconds to cut off gas flow (even with

Instructions for the user 6 CLEANING AND MAINTENANCE Before any intervention, disconnect the appliance from the mains. 6.1 Cleaning the sta

Instructions for the user 36 In models equipped with pan stands, fit as shown in the figure, taking care to position them exactly as shown. Refer t

Introduction 1 INSTRUCTIONS FOR SAFE AND PROPER USE THIS MANUAL IS AN INTEGRAL PART OF THE APPLIANCE AND THEREFORE MUST BE KEPT IN ITS ENTIRETY AN

Introduction THE APPLIANCE DATA PLATE, WITH TECHNICAL DATA, REGISTRATION NUMBER AND BRAND NAME, IS POSITIONED AT A VISIBLE POINT UNDER THE SAFETY C

Instructions for the installer 23 2 POSITIONING OF THE HOB The following operation requires building and/or carpentry work so must be carried ou

Instructions for the installer 4) 24 2.2 Attachment to support structure, flush-mounting model Create an opening with the dimensions shown in

Instructions for the installer 25 4) Mill to this depth for laminated worktops of lessthan 3mm thickness. Apply a layer of “waterproof primer

Instructions for the installer 26 The appliance is equipped with 4 supplementary brackets for levelling if necessary (see detail B, fig. 5). The fo

Instructions for the installer 27 2.3 Electrical connection Make sure that the voltage and capacity of the power supply cable conform to the data

Instructions for the installer 28 2.4 Ventilation requirements The appliance may be installed only in rooms with permanent ventilation, as requi