Smeg S45VX2 Instruction Manual download pdf (Page 34)

Instructions for the Installer

During installation, make sure that the power cable does not come

into contact with any moisture or objects with sharp edges and the

back of the oven. High temperatures can damage the cable.

Warning: after the oven is installed you must make sure you can

access the plug.

15.2 Electrical connection

The nameplate with the technical data, serial number and mark is in a

visible position on the oven door frame.

The nameplate must never be removed.

The appliance must be connected to earth in compliance with electrical

system safety regulations.

If a permanent connection is used, the appliance's power supply line must

be fitted with an omnipolar breaking device with contact gap of at least 3

mm, located in an easily accessible position close to the appliance itself.

If a socket and plug connection is used, check that they are of the same

type. Do not use reducers, adapters or junctions since they may cause

overheating or burns.

1 2 ... 29 30 31 32 33 34 35 36

No comments

Smeg S45VX2 Instruction Manual Page 34