Smeg XXSC111P User Manual download pdf (Page 29)

Instructions for the User

12.4 Removing the inside glass with the door cold

The glass in the door should always be kept thoroughly clean. For easier

cleaning, the door glazing can be fully removed by proceeding as

described below. After opening the door and locking it in place as

described in point «12.2 Removing the door», remove the three panes of

glass. They are all removed in two stages: first extract the pane from the

guide «A» (see detail) by sliding it towards you and lifting it slightly, then

also free it from the guide «B». If the door should close during these

operations, simply relock one of the hinges as described in point «12.2

Removing the door». The panes of glass can now be washed separately.

Use absorbent kitchen roll; remove stubborn dirt with a damp sponge and

ordinary detergent.

Caution: before removing the panes of glass, make sure that at least one

of the door's hinges has been locked in open position as described in

points «12.2 Removing the door». This operation might have to be

repeated during the glass removal process if the door is accidentally freed.

Caution: replace the panes of glass in the same order and in the same

position as before removal, taking care to push the last pane with the

marking into the guide A to lock it in place. When complete, release the

hinges and close the door.

In the diagram below, the 3 panes of glass have been removed.

1 2 ... 24 25 26 27 28 29 30 31 32

No comments

Smeg XXSC111P User Manual Page 29