Smeg SMEG500BL Instruction Manual download pdf (Page 12)

Installation

28

5 Installation

5.1 Electrical connection

General information

• Check the mains characteristics against

the data indicated on the plate. The

identification plate bearing the technical

data, serial number and brand name is

visibly positioned inside the appliance. Do

not remove this plate for any reason.

• Make sure that the plug and socket are of

the same type.

• Avoid using adapters and shunts as these

could cause overheating and a risk of

burns.

• The plug must always be accessible when

the appliance is installed.

• If it is necessary to replace the power

supply cable, this must be performed by

an authorised technician from Technical

Support Service.

5.2 Positioning

Spacers

To ensure that the condenser cools

properly, the appliance must not be located

too close to the wall. To prevent this, the

appliance comes complete with two plastic

spacers which are fitted on the metal casing

behind the appliance.

Power voltage

Danger of electrocution

• The appliance must be earthed in

compliance with electrical system

safety standards.

• Do not pull the cable unplug

the appliance.

Heavy appliance

Danger of crush injuries

• Position the appliance with the aid of a

second person.

• Always handle the appliance with the lid

down.

Improper use

Risk of damage to the appliance

• The appliance must not be exposed to

direct sunlight.

• Do not use the appliance outdoors.

1 2 ... 7 8 9 10 11 12 13 14

Comments to this Manuals

No comments