FULL ELECTRONIC WASHING MACHINE USER MANUAL
FUNCTION BUTTONS Rinse hold This function is recommended to be used when the clothes cannot be taken immediately after the end of
The prewash With this function you can start an additional wash operation for heavily soiled laundry. When you use this function you must put d
Timer The timer function enables you to set your machine to start its wash operation with delay. Depending on the delay time you wis
PROGRAM KNOB With the program knob, you can select the program with which you desire to wash your clothes. You can adjust the program selection proces
SECTION 5: WASHING YOUR LAUNDRY • Plug the machine. • Open the tap water. First wash cycle There may be wa
• Pull the textiles like trousers,knitted fabric,t-shirt and sweat shirt inside out. • Wash your small clothes like socks and handkerchiefs in a was
• You can use fluid detergents in all programs without pre-washing. For this, mount the fluid detergent level plate in the second compartment of the
Selecting an additional function button • Adjust the programme button to a programme you wish to select. • If the programme you selected is a wash p
Cancelling a programme If you wish a certain programme in progress to finish early: • Press the start/pause button for 4 seconds. • Your mach
WARNING! In the event power is cut off at any stage of the wash programmes and then resupplied after a certain while your machine will continue the pr
THE CONTENTS SECTION 1:BEFORE USING • Safety warnings • Recommendations SECTION 2:INSTALLATION • Removal of transportation screws • Adjustment of
Max. Dry Load Capacity (kg) PROGRAM Detergent Compart. 32 LT 40 LT 42 LT 47 LT 52 LT 57 LT Type of
SECTION 6: MAINTENANCE AND CLEANING • Unplug your machine. • Close the water t
WARNING! Danger of being scalded! Since the water inside the pump may
SIPHON PLUG Pull out the detrgent drawer. Remove the siphon plug and clean the r
SECTION 7:PRACTICAL INFORMATION Alcoholic beverages: The stain point, sh
Mould: Mould stains should be cleaned as soon as possible. The
FAILURE PROBABLE CAUSE METHODS OF ELIMINATION It is unplugged. Insert the plug i
FAILURE PROBABLE CAUSE METHODS OF ELIMINATION There is a small amount of clothes
FAILURE PROBABLE CAUSE METHODS OF ELIMINATION Clothes exceeding the maximum ca
FAILURE PROBABLE CAUSE METHODS OF ELIMINATION The spining process is not done or
SECTION 1:BEFORE USING SAFETY WARNINGS • Do not use a multiple socket or extension cord. • Do not insert a plug with damaged or broken cord int
FAILURE CODE FAILURE INDICATOR PROBABLE FAILURE THE PROCESS TO BE DONE E02 The 1
FAILURE CODE FAILURE INDICATOR PROBABLE FAILURE THE PROCESS TO BE DONE E05 The 2
FAILURE CODE FAILURE INDICATOR PROBABLE FAILURE THE PROCESS TO BE DONE E09 The 1
SECTION 10: INTERNATIONAL WASHING SIGNS Washing temparature. Do not wash (hand wash) Lukewarm iron. Medium ho
PUMP FILTER The p
• If you will not use your machine for a long time, unplug your machine, close the water supply and leave the door open in order to keep the inside o
ADJUSTMENT OF FEET • Do not install your machine on rugs or similar surfaces. • For your machine to work silently and without any vibration, it shou
• Water pressure of 1-10 bars from your tap will enable your machine to work more efficiently.(1 bar pressure means water flow of more than 8 liters
SECTION 3: TECHNICAL SPECIFICATIONS 32 LT 40 LT 42 LT 47 LT 52 LT 57 LT Maximum dry laundry capacity (kg) 3,5 5 5 6 7 7,5 Recommended loadi
SECTION 4:CONTROL PANEL 1 2 4 5
START/PAUSE BUTTON This button is used for starting a selected programme or putting a programme in progress on pause.
Comments to this Manuals