Smeg SUK62CMX8 Service Manual download pdf (Page 23)

Instructions for the installer

11.2 Room ventilation and combustion extraction

The room containing the appliance should be permanently ventilated in accordance with the standards

in force. The room where the appliance is installed must have enough air flow as required for the regular

combustion of gas and by the necessary air exchange of the same room. The air vents, protected by

grills, must be suitably dimensioned in compliance with current standards and positioned so that no part

of them is obstructed.

The appliance must be kept adequately ventilated in order to eliminate the heat and humidity produced

by cooking: in particular, after prolonged use, you are recommended to open a window or to increase the

speed of any fans.

Combustion products can be extracted by means of hoods connected to a natural draught chimney

whose efficiency is assured or via forced extraction. An efficient extraction system requires precision

planning by a specialist qualified in this area and must comply with the positions and distances indicated

by the standards. When the job is complete, the installer must issue a certificate of conformity.

Extraction using a hood.

Extraction without a hood.

Single natural draught chimney.

Single chimney with extractor

fan.

Directly outdoors with wall- or

window-mounted extractor fan.

Directly outdoors through wall.

Air

Combustion products

Extractor fan

1 2 ... 18 19 20 21 22 23 24 25 26 27 28

No comments

Smeg SUK62CMX8 Service Manual Page 23