Smeg U3F082P User Manual download pdf (Page 21)

Periodic cleaning

CAUTION! Do not pull, move

or damage any pipes and/or

cables inside the appliance.

CAUTION! Do not damage the

cooling system.

The equipment has to be cleaned

regularly:

1. Clean the inside and accessories with

lukewarm water and some neutral

soap.

2. Regularly check the door seals and

wipe them clean to ensure they are

clean and free from debris.

3. Rinse and dry thoroughly.

4. If accessible, clean the condenser and

the compressor at the back of the

appliance with a brush.

This will improve the performance of

the appliance and save electricity

consumption.

Cleaning the air channels

1. Remove the plinth (A), then the

ventilation grid (B).

C AB

2. Clean the ventilation grid. (Refer to

"Cleaning the ventilation filter ". )

3. Carefully pull the air deflector out (C),

checking that there is no water left

from the defrosting.

4. Clean the lower part of the appliance

with a vacuum cleaner.

Cleaning the ventilation filter

The filter can be removed for washing.

The appliance is equipped with an air inlet

filter (1) and an air outlet duct (2) on the

ventilation grid.

2

1

A

B

1. Pinch flaps (A) and (B) with fingers.

2. Pull the filter down.

3. Pull the filter out.

4. To replace the filter reverse the

process.

Defrosting of the freezer

CAUTION! Never use sharp

metal tools to scrape off frost

from the evaporator as you

could damage it. Do not use a

mechanical device or any

artificial means to speed up the

thawing process other than

those recommended by the

manufacturer. A temperature

rise of the frozen food packs,

during defrosting, may shorten

their safe storage life.

About 12 hours prior to

defrosting, set a lower

temperature, in order to build

up sufficient chill reserve for

the interruption in operation.

21

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 55 56

Comments to this Manuals

No comments