Smeg C7280NLD2P User Manual Page 50

  • Download
  • Add to my manuals
  • Print
  • Page
    / 80
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 49
Problem Possible cause Solution
The door is not closed cor-
rectly.
Refer to "Closing the door".
The QuickFreeze function
is switched on.
Refer to "QuickFreeze func-
tion".
The IntensiveCooling func-
tion is switched on.
Refer to "IntensiveCooling func-
tion".
The compressor does not
start immediately after press-
ing the QuickFreeze, or after
changing the temperature.
This is normal, no error has
occurred.
The compressor starts after a
period of time.
The compressor does not
start immediately after press-
ing the IntensiveCooling, or
after changing the tempera-
ture.
This is normal, no error has
occurred.
The compressor starts after a
period of time.
Water flows inside the refrig-
erator.
The water outlet is clog-
ged.
Clean the water outlet.
Food products prevent that
water flows into the water
collector.
Make sure that food products
do not touch the rear plate.
Water flows on the floor. The melting water outlet is
not connected to the evap-
orative tray above the com-
pressor.
Attach the melting water outlet
to the evaporative tray.
Temperature cannot be set. The QuickFreeze or Intensi-
veCooling function is
switched on.
Switch off QuickFreeze or In-
tensiveCooling manually, or
wait until the function resets
automatically to set the temper-
ature. Refer to "QuickFreeze or
IntensiveCooling function".
DEMO appears on the dis-
play.
The appliance is in demon-
stration mode.
Keep the OK pressed for ap-
proximately 10 seconds until a
long sound is heard and display
shuts off for a short time.
The temperature in the appli-
ance is too low/too high.
The temperature regulator
is not set correctly.
Set a higher/lower temperature.
The door is not closed cor-
rectly.
Refer to "Closing the door".
The food products' tem-
perature is too high.
Let the food products tempera-
ture decrease to room temper-
ature before storage.
50
Page view 49
1 2 ... 45 46 47 48 49 50 51 52 53 54 55 ... 79 80

Comments to this Manuals

No comments