Smeg FC345X1 Troubleshooting Guide download pdf (Page 7)

142468

• Place the appliance in dry and well aired room. The appliance

operates best at temperature ranges indicated in the chart

below. Relevant class of the appliance is indicated on the

rating plate.

Class Ambient temperature

SN (subnormal) from +10°C to +32°C

N (normal) from +16°C to +32°C

ST (subtropical) from +16°C to +38°C

T (tropical) from +16°C to +43°C

Positioning the appliance requires two persons in order to avoid

injuries or damage to the appliance.

• Place the appliance ﬂ atly and ﬁ rmly on a solid base. The

appliance is ﬁ tted with adjustable feet on the front side, used

to level the appliance. Rear side of the appliance is ﬁ tted with

wheels (certain models only) facilitating the positioning of the

appliance at the preselected place.

• The element above the appliance must be at least 5 cm away

to allow sufﬁ cient cooling of the condenser.

• Avoid exposing the appliance to direct sunlight or heat

sources. If this is not possible, install insulation plate between

the appliance and adjacent heat source.

• Bottom front corners of the appliance is ﬁ tted with handles to

facilitate moving (certain models only). The appliance may

stand independently or adjacent to a furniture element or wall.

Be sure to leave enough space for the opening of the door, to

avoid damage to the appliance or personal injury. Also leave

ample space for extracting shelves (see installation diagram).

Selecting the locationSelecting the location

Positioning the

appliance

Positioning the

appliance

Installation and connection

1 2 3 4 5 6 7 8 9 10 11 12 ... 27 28

No comments

Smeg FC345X1 Troubleshooting Guide Page 7