Smeg CIR60X User Manual download pdf (Page 17)

Instructions for the user

8. USING THE HOB

Before turning on the burners, make sure that the burner rings, caps and

grids have been fitted correctly.

In the ultrarapid burner, notch A must be aligned with pin B.

Grid C provided is intended for use with woks (Chinese pans).

Adapter D comes only with open grids models and is intended for use

with small sized vessels.

Some models do not feature all accessories.

8.1 Ignition of the burners

For each knob the corresponding burner is indicated. The device is fit

with electronic ignition. Simply press and simultaneously turn the knob

counter-clockwise on the low point flame symbol, until the burner is

ignited. Concerning models with valves, push the knob for approximately

2 seconds in order to keep the flame burning and to activate the safety

device. The burner might go off when the knob is released. In this case

repeat the aforesaid operation keeping the knob pressed for more than 2

seconds.

Should the burners go off accidentally in the models with valves, a safety

device will trip after approximately 20 seconds to block the gas outlet

even if the tap is open.

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 23 24

No comments

Models	Document Type
TZ-50	User Manual Genie TZ-50 User Manual, 39 pages
TZ-50	User Manual Genie TZ-50 User Manual, 41 pages
SUPERLIFT 33547	User Manual Genie SUPERLIFT 33547 User Manual, 26 pages

Smeg CIR60X User Manual Page 17