Smeg CIR60X3 Instruction Manual download pdf (Page 11)

Instructions for the installer

5. ADAPTATION TO DIFFERENT TYPES OF GAS

Before performing any cleaning or maintenance work, detach the

appliance from the electrical socket.

The hob has been inspected for NG natural gas at a pressure of 1.0

kPa. For functioning with other types of gas the nozzles must be replaced

and the primary air adjusted.

To replace the nozzles and regulate the burners, you have to remove the

top as described in the following paragraph.

5.1 Removing the hob

1. Remove all the knobs, the grids, the burner caps and the flame-caps;

2. remove the screws and the nuts A that secure the burner supports;

3. remove plates B;

4. lift the hob from its seat;

5. replace the burner nozzles in accordance with the reference gas

chart;

6. regulate the primary air as described in paragraph “6.2 Regulation

for LPG”.

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 23 24

No comments

Smeg CIR60X3 Instruction Manual Page 11