Smeg GCS90XG Instruction Manual

Contents 1. INSTRUCTIONS FOR SAFE AND PROPER USE________________ 4 2. POSITIONING OF HOB ____________________________________ 6 3. ELECTRICAL CON

Instructions for the installer 12 5.2 Regulation for LPG Loosen screw A and push support B all the way. Use a double head wrench to remove nozzle C

Instructions for the installer 13 5.3 Regulation for natural gas The hob has been inspected for G20 (2H) natural gas at a pressure of 20 mbar. To

Instructions for the installer 14 6. FINAL OPERATIONS Having carried out the above adjustments, reassemble the appliance following, backwards, the

Instructions for the installer 15 6.3 Arrangement of burners on hob BURNERS 1 Auxiliary 2 Semi-rapid 3 Rapid 4 Double

Instructions for the user 16 7. USING THE HOB Before turning on the burners, make sure that the burner rings, caps and grids have been fitted

Instructions for the user 17 7.2 Practical advice for using the burners For better burner performance and minimum gas consumption, flat bottomed,

Instructions for the user 18 8. LEANING AND MAINTENANCE Never use a steam jet to clean the appliance. Before any intervention, disconnect t

Instructions for the user 19 8.2 Cleaning of cooking hob components Grids, caps, flame cap crowns and burners can be removed for ease of cleaning.

Introduction 1. INSTRUCTIONS FOR SAFE AND PROPER USE THIS MANUAL IS AN INTEGRAL PART OF THE APPLIANCE AND THEREFORE MUST BE KEPT IN ITS ENTIRETY

Introduction THE IDENTIFICATION PLATE, WITH TECHNICAL DATA, SERIAL NUMBER AND MARKING IS CLEARLY VISIBLE UNDER THE CASING. THE PLATE ON THE CASIN

Instructions for the installer 6 2. POSITIONING OF HOB The following operation requires building and/or carpentry work so must be carried out

Instructions for the installer 7 In case of installation on a hollow compartment with doors, a separating panel has to be placed under the hob.

Instructions for the installer 8 3. ELECTRICAL CONNECTION Make sure that the voltage and capacity of the power line conform to the data shown on

Instructions for the installer 9 4. GAS CONNECTION Connection to the gas mains may be made with a rigid copper pipe or with a flexible pipe and

Instructions for the installer 10 4.1 Connection to LPG Use a pressure regulator and make the connection to the tank according to the provisions

Instructions for the installer 11 5. ADAPTATION TO DIFFERENT TYPES OF GAS Before performing any cleaning or maintenance work, detach the app