Smeg SE2644ID1 Datasheet download pdf (Page 14)

Instructions for the installer

8.5 Mounting

Before mounting the device to the unit, lay the provided adhesive sponge onto

the glass surface to separate it from the unit.

After fixing the provided adhesive sponge (B) to the glass, mount the device to

the unit with the mounting brackets (A) provided with the device itself, as shown

in the figure.

When fixing the hob to the cabinet, use only the holes provided, illustrated here.

8.6 Ventilation

Installation of an oven without cooking fan underneath the hob is forbidden.

In any event, if installed above an oven or a dishwasher, a space of at least 5 cm must be left

between the hob and the top of the appliance installed below.

In addition to this, leave an opening of at least 4 mm between the top of the front panel of the

built-in oven beneath and the base of the hob (see figure below)

Do not obstruct the ventilation grille in front of the product in any type of installation

Below are illustrations of two cases (1 and 3) of installation suitable for correct ventilation and one case

(n° 2) of installation to be avoided

1 2 ... 9 10 11 12 13 14

No comments

Smeg SE2644ID1 Datasheet Page 14