Smeg SUK81MFX8 User Manual download pdf (Page 11)

Use

13

EN

Reduction pan stands

The reduction pan stands have to be

placed on the hob grids. Make sure they

are properly placed.

3.4 Using the hob

All the appliance's control and monitoring

devices are located together on the front

panel. The burner controlled by each knob

is shown next to the knob. The appliance is

equipped with an electronic ignition device.

Simply press the knob and turn it anti-

clockwise to the maximum flame symbol,

until the burner lights. If the burner does not

light in the first 15 seconds, turn the knob to

and wait 60 seconds before trying

again. After lighting, keep the knob pressed

in for a few seconds to allow the

thermocouple to heat up. The burner may

go out when the knob is released: in this

case, the thermocouple has not heated up

sufficiently. Wait a few moments and repeat

the operation. Keep the knob pressed in

longer.

Correct positioning of the flame-

spreader crowns and burner caps

Before lighting the hob burners, make sure

that the flame-spreader crowns are

correctly positioned in their housings with

their respective burner caps. Make sure that

the holes in the flame-spreader crowns are

aligned with the igniters and thermocouples

(A).

Practical tips for using the hob

For better burner efficiency and to minimise

gas consumption, use pans with lids and of

suitable size for the burner, so that flames

do not reach up the sides of the pan. Once

the contents come to the boil, turn down the

flame far enough to ensure that the liquid

does not boil over.

In case of an accidental switching

off, a safety device will be tripped,

cutting off the gas supply, even if

the gas tap is open. Return the

knob to and wait at least 60

seconds before lighting it again.

Cookware diameters:

• Auxiliary: 12 - 14 cm.

• Semi-rapid: 16 - 24 cm.

• Rapid: 18 - 26 cm.

• Ultra-rapid: 18 - 28 cm.

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 27 28

Comments to this Manuals

No comments