Smeg SUK81MFX8 User Manual download pdf (Page 18)

Cleaning and maintenance

20

4 Cleaning and maintenance

4.1 Instructions

4.2 Cleaning the appliance

To keep the surfaces in good condition,

they should be cleaned regularly after use.

Let them cool first.

Ordinary daily cleaning

Always use only specific products that do

not contain abrasives or chlorine-based

acids.

Pour the product onto a damp cloth and

wipe the surface, rinse thoroughly and dry

with a soft cloth or a microfibre cloth.

Food stains or residues

Do not use metallic sponges or sharp

scrapers as they will damage the surfaces.

Use ordinary non-abrasive products with

the aid of wooden or plastic utensils if

necessary. Rinse thoroughly and dry with a

soft cloth or a microfibre cloth.

Do not allow residues of sugary foods (such

as jam) to set inside the oven. If left to set for

too long, they might damage the enamel

lining of the oven.

Cooking hob grids

Remove the grids and clean them with

lukewarm water and non-abrasive

detergent. Make sure to remove any

encrustations. Dry them thoroughly and

return them to the hob.

Flame-spreader crowns and burner caps

For easier cleaning, the flame-spreader

crowns and the burner caps can be

removed. Wash them in hot water and non-

abrasive detergent. Carefully remove any

encrustation, then wait until they are

perfectly dry. Refit the flame-spreader

crowns making sure that they are correctly

positioned in their housings with their

respective burner caps.

Improper use

Risk of damage to surfaces

• Do not use steam jets for cleaning the

appliance.

• Do not use cleaning products containing

chlorine, ammonia or bleach on steel

parts or parts with metallic finishes on the

surface (e.g. anodizing, nickel- or

chromium-plating).

• Do not use abrasive or corrosive

detergents on glass parts (e.g. powder

products, stain removers and metallic

sponges).

• Do not use rough or abrasive materials

or sharp metal scrapers.

• Do not wash the removable

components such as the hob pan stands,

flame-spreader crowns and burner caps

in a dishwasher.

Continuous contact between the

grids and the flame can cause

modifications to the enamel over

time in those parts exposed to

heat. This is a completely natural

phenomenon which has no effect

on the operation of this

component.

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 27 28

Comments to this Manuals

No comments