Smeg SY62MX8 Service Manual download pdf (Page 28)

Instructions for the installer

11. INSTALLATION

11.1 Installing in kitchen units

Veneers, adhesives or plastic coatings on adjacent furniture should be temperature-resistant (no less

than 90°C). If they are not sufficiently temperature-resistant, they may warp over time.

The appliance must be installed by a qualified technician and according to the standards in force.

Depending on the type of installation, this appliance belongs to class 2, subclass 1 (Fig. A - Fig. B) or

class 1 (Fig. C).

It may be installed next to walls, one of which must be higher than the appliance, at a minimum distance

of 50 mm from the side of the appliance, as shown in figures A and C relative to the installation classes.

Any wall units must be at a minimum distance of at least 750 mm above the appliance. This distance can

be reduced to 650 mm if a ventilation hood is installed.

Built-in appliance

(Class 2 subclass 1)

Built-in appliance

(Class 2 subclass 1)

Free-standing

appliance (Class 1)

1 2 ... 23 24 25 26 27 28 29 30 31 32 33 34 35 36

No comments

Smeg SY62MX8 Service Manual Page 28