Smeg SY62MX8 Service Manual download pdf (Page 35)

Instructions for the installer

12.3 Burner and nozzle characteristics table

Burner

Rated heating

capacity (kW)

LPG GAS - G30/G31 28-30/37 mbar

Nozzle

diameter

(1/100 mm)

Reduced

capacity (W)

Capacity

(g/h G30)

Capacity

(g/h G31)

Auxiliary 1.05 50 400 76 75

Semi-rapid 1.8 65 500 131 129

Ultra-rapid 3.9 100 1600 283 278

Burner

Rated heating

capacity (kW)

NATURAL GAS - G20 20 mbar

Nozzle

diameter

(1/100 mm)

Prechamber

(printed on

nozzle)

Reduced capacity

(W)

Auxiliary 1.05 72 (X) 400

Semi-rapid 1.8 97 (Z) 500

Ultra-rapid 3.9 135 (K) 1600

12.4 Final operations

After replacing the nozzles, reposition the flame-spreader crowns, the burner caps and the pan stands.

Following adjustment to a gas other than the one originally set in the factory, replace the gas setting

label fixed to the appliance with the one corresponding to the new gas. The label is inserted inside the

nozzle pack (where present).

12.4.1Adjusting the hob burner minimum for city or natural gas

Light the burner and turn it to the minimum position.

Extract the gas tap knob and turn the adjustment screw

next to the tap rod (depending on the model) until the

correct minimum flame is achieved. Refit the knob and

verify that the burner flame is stable (when turning the

knob rapidly from the maximum to the minimum position

the flame must not go out). Repeat the operation on all

the gas taps.

12.4.2Adjusting the hob burner minimum for LPG gas

In order to adjust the minimum setting with liquid gas, the screw at the side of the tap rod must be

tightened clockwise all the way.

1 2 ... 30 31 32 33 34 35 36

Comments to this Manuals

No comments

Smeg SY62MX8 Service Manual Page 35

Comments to this Manuals

Related products and manuals for Cookers Smeg SY62MX8