Smeg FC345X1 Troubleshooting Guide download pdf (Page 17)

142468

is cooled enough for safe storage of food. During the ﬁ rst start

of the appliance there is a 24 hour delay of the temperature

alarm to avoid unnecessary alarm operation..

Intermittent alarm sound - power failure signal

If the temperature of the refrigerator or freezer is raised too much

as a consequence of power failure, sound alarm is activated

(intermittent tone), red signal lamp is on, and the display ﬂ ashes

the highest temperature digit (in case of refrigerator maximum

9°C).

Intensive cooling

Intensive cooling of the refrigerator is activated by pressing

the button G (orange signal lamp H is on). It is automatically

switched off after 6 hours, and the selection is set back to

the pervading value. It is intended for fast cooling of large

quantity of inserted food.

Intensive freezing

It is activated by pressing the button E (orange signal lamp F is

on), and the intensive cooling of the freezer starts. If the setting

is not deactivated (by pressing the E button once again), the

setting will e deactivated automatically approximately two days

after activation. Setting is intended for fast freezing of large

quantities of inserted food. In case of power failure the fast

freezing process is repeated. Use the setting also with the ﬁ rst

start of the appliance, before intended cleaning, and in case of

large quantities of food inserted in the appliance.

Child lock

Integrated child lock protects the appliance from accidental

temperature setting changes or even switching the appliance

off. You can activate or deactivate the child lock by pressing the

alarm button (I) for 3 seconds (both displays ﬂ ash ‘LL’ and ‘L’

for 3 seconds). Once the child lock is activated, only the alarm

button is active. Pressing any other button provokes the letters

‘LL’ and ‘L’ to appear on the display.

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 27 28

No comments

Smeg FC345X1 Troubleshooting Guide Page 17