Smeg BQ6030 User Manual download pdf (Page 4)

Instructions for the Installer

CHANGING THE NOZZLES

REPLACING THE BURNER SECTION NOZZLES

1 Remove the grids and refractory plates inside the

barbecue section.

2 Undo the screws (for each burner) on the rear

cross-member.

3 Remove the burners from the barbecue section.

4 Using a 7 mm socket wrench, undo the nozzles on

the taps (replace the nozzles as specified in the

table above).

5 Adjust the primary air flows (see adjusting primary

air flows section).

6 Put the burners back into place correctly and

tighten the fixing screws.

REPLACING THE RADIANT GRILL NOZZLES (ON

TOP VERSIONS ONLY)

1 Remove the rear of the barbecue by undoing the

supporting screws.

2 Using a 7 mm spanner, unscrew the nozzle (1).

3 Replace the nozzles as specified in the table

above. To make it easier to fit the nozzle, the nut

(2) can be unscrewed.

4 Retighten the nut (2) with great care.

5 Fit the rear part back into place and screw on with

the fixing screws.

REPLACING THE ULTRARAPID BURNER NOZZLE

(BQ6030 MODELS ONLY)

1 Remove the grid, the burner cap and the flame

diffuser ring.

2 Using a 7 mm socket wrench, unscrew the burner

nozzle.

3 Replace the nozzle as specified in the table above.

4 Put the burner, the burner cap and the flame

diffuser ring back into place correctly.

5 Fit the rear part back into place and screw on with

the fixing screws.

1 2

1 2 3 4 5 6

No comments

Smeg BQ6030 User Manual Page 4