Contents 1. INSTRUCTIONS FOR SAFE AND PROPER USE_______________ 21 2. POSITIONING OF HOB ___________________________________ 23 3. ELECTRICAL CON
Instructions for the installer 29 5.2 Regulation for LPG Loosen screw A and push support B all the way. Use a double head wrench to remove nozzle
Instructions for the installer 30 5.3 Regulation for natural gas The hob has been inspected for G20 (2H) natural gas at a pressure of 20 mbar. To a
Instructions for the installer 31 6. FINAL OPERATIONS Having carried out the above adjustments, reassemble the appliance following, backwards, th
Instructions for the installer 32 6.3 Arrangement of burners on hob BURNERS 1 Auxiliary 2 Semi-rapid 3 Rapid 4 Double c
Instructions for the user 33 7. USING THE HOB Before turning on the burners, make sure that the burner rings, caps and grids have been fitt
Instructions for the user 34 7.2 Practical advice for using the burners For better burner performance and minimum gas consumption, flat bottomed,
Instructions for the user 35 8. LEANING AND MAINTENANCE Never use a steam jet to clean the appliance. Before any intervention, disconnec
Instructions for the user 36 8.2 Cleaning of cooking hob components Grids, caps, flame cap crowns and burners can be removed for ease of cleaning.
Introduction 1. INSTRUCTIONS FOR SAFE AND PROPER USE THIS MANUAL IS AN INTEGRAL PART OF THE APPLIANCE AND THEREFORE MUST BE KEPT IN ITS ENTIRETY
Introduction THE IDENTIFICATION PLATE, WITH TECHNICAL DATA, SERIAL NUMBER AND MARKING IS CLEARLY VISIBLE UNDER THE CASING. THE PLATE ON THE CASIN
Instructions for the installer 23 2. POSITIONING OF HOB The following operation requires building and/or carpentry work so must be carried o
Instructions for the installer 24 In case of installation on a hollow compartment with doors, a separating panel has to be placed under the hob.
Instructions for the installer 25 3. ELECTRICAL CONNECTION Make sure that the voltage and capacity of the power line conform to the data shown
Instructions for the installer 26 4. GAS CONNECTION Connection to the gas mains may be made with a rigid copper pipe or with a flexible pipe and
Instructions for the installer 27 4.1 Connection to LPG Use a pressure regulator and make the connection to the tank according to the provisions
Instructions for the installer 28 5. ADAPTATION TO DIFFERENT TYPES OF GAS Before performing any cleaning or maintenance work, detach the appl
Comments to this Manuals