Smeg Freestanding Cooker CSA150X-6 User Manual download pdf (Page 6)

Instructions for the Installer

Overall dimensions: location of gas and electrical connection points

(all measures in mm).

A 110

B 760

C 170

D 150

2.3 Gas connection

This appliance is suitable for installation with Natural

Gas or ULPG (propane). Refer to page 13 for the

relevant burner pressure and appropriate injector

sizes. When the appliance is to be connected to

Natural Gas then the pressure regulator supplied must

be fitted to the gas inlet. A test point (for checking the

gas pressure) is supplied either with the regulator or as

a separate fitting in the case of LPG (propane)

appliances.

Connection of the appliance to the gas supply must be

in accordance with the requirements of AS5601. A ½”

BSP connector at the inlet is recommended and the

gas supply line to the appliance must be of adequate

length to allow sufficient withdrawal of appliance for

service or disconnection and be:

1) annealed copper pipe or;

2) Flexible hose according to AS/NZ1869 & be at

least Class “B”, 10 mm diameter, max length 100

mm.

The cooker must be installed with provision to allow

the gas to be turned off and disconnected for servicing

and removal of the appliance as required from the gas

supply.

Before the cooker is operated make certain all relevant

1 2 3 4 5 6 7 8 9 10 11 ... 39 40

No comments

Smeg Freestanding Cooker CSA150X-6 User Manual Page 6