Smeg SA9058X Instruction Manual download pdf (Page 9)

Instructions for the installer

4 ADAPTATION TO DIFFERENT GAS TYPES

Before carrying out any procedure, cut the electrical supply to the appliance.

The cooking range hob is set to use natural gas G20/G25 (2E+) at a pressure of 20/25 mbars in

cooking ranges with a large oven, and butane/propane gas G30/G31 (3+) at a pressure of 28/37

mbars in cooking ranges provided with a cylinder housing. Moreover, the guide eye of the hose must

be replaced with the appropriate one provided. If other types of gas are used, the burner injectors

must be replaced, then the minimum flame must be adjusted on the gas taps. To replace the

injectors, follow the instructions set out below.

4.1 Replacing the hob injectors

This process does not require the

primary air supply to be adjusted.

1. Remove the racks, take out all

flame spreaders and caps;

2. use a 7-mm tubular spanner to

unscrew the burner injectors;

3. replace the burner injectors

according to the gas to be used

and as described in paragraph

“3.2/3.3 Tables of burner and

injector characteristics”.

4. Put the burners back into their

housings correctly.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 23 24

No comments

Smeg SA9058X Instruction Manual Page 9