Smeg PGA95FSC3 Instruction Manual

Contents 1. INSTRUCTIONS FOR SAFE AND PROPER USE________________ 4 2. INSTALLATION OF THE APPLIANCE_________________________ 6 3. GAS CONNECTION__

Instructions for the installer 12 3. GAS CONNECTION This appliance is suitable for installation with Natural Gas or ULPG (propane). Refer to page

Instructions for the installer 13 3.1 Electrical connection Make sure that the voltage and capacity of the power line conform to the data shown

Instructions for the installer 14 4. ADAPTATION TO DIFFERENT TYPES OF GAS Before performing any cleaning or maintenance work, detach theapplia

Instructions for the installer 15 4.2 Burner and nozzle characteristics table Burner ULPG – 2.75 kPa Nominal gas consumption (MJ/h) Inje

Instructions for the installer 16 5. FINAL OPERATIONS Having carried out the above adjustments, reassemble the appliance following, backwards, the

Instructions for the user 6. USE OF THE COOKING HOB 6.1 Lighting the burners Before lighting the hob burners check that the flame caps are i

Instructions for the user 18 6.2 Practical advice for using the burners For better use of the burners and lower gas consumption, use covered contai

Instructions for the user 7. CLEANING AND MAINTENANCE Before any intervention, disconnect the power supply of the device. 7.1 Cleaning stain

Instructions for the user 20 7.3 Preventive maintenance This appliance does not need any special maintenance. However, a few simple operations have

Instructions for the installer 4 1. INSTRUCTIONS FOR SAFE AND PROPER USE THIS MANUAL IS AN INTEGRAL PART OF THE APPLIANCE AND THEREFORE MUST BE

914772758/ C

Instructions for the installer 5 DO NOT PUT PANS WITHOUT PERFECTLY SMOOTH AND FLAT BOTTOMS ON THE COOKING HOB GRIDS. DO NOT USE RECIPIENTS OR

Instructions for the installer 6 2. INSTALLATION OF THE APPLIANCE The following operation requires building and/or carpentry work so must be car

Instructions for the installer 7 2.2 Attachment to support structure, flush-mounting model Create an opening with the dimensions shown in the fig

Instructions for the installer 8 Overall dimensions: location of gas and electrical connection points (all measures in mm). Caution: surfac

Instructions for the installer 9 2.3 Clearance above and around domestic appliances Extract from AS5601 REQUIREMENTS 1 Overhead clearances –

Instructions for the installer 10 2 Side clearances – (Measurements B & C) Where B, measured from the periphery of the nearest burner to any ve

Instructions for the installer 11 2.5 Discharge of combustion products Discharge of combustion products must be guaranteed by means of hoods conn