Smeg STA4645 User Manual download pdf (Page 66)

12 Rev 0.0

INSTALLATION INSTRUCTIONSEN

5 INSTALLATION AND HOOK-UP

DURING INSTALLATION, TAKE CARE NOT TO INJURE YOURSELF

ON THE SHARP EDGES OF THE APPLIANCE.

Remove the polystyrene rack blocks. Position the appliance in the chosen in-

stallation position. The sides and rear of the appliance can lie against kitchen

units or walls. If the dishwasher is installed next to a heat source, separate it

with a heat insulating panel in order to prevent overheating and malfunctions.

To assure stability, only install built-in appliances under continuous worktops,

securing them to the adjacent kitchen units or worktop with screws.

BUILDING-IN A DISHWASHER UNDERNEATH A CERAMIC HOB IS

ABSOLUTELY FORBIDDEN. A DISHWASHER CAN BE BUILT-IN

UNDERNEATH A CONVENTIONAL HOB PROVIDED THERE IS NO

BREAK IN THE KITCHEN WORKTOP, AND THE DISHWASHER

AND HOB ARE INSTALLED AND SECURED CORRECTLY, SO

THAT NO HAZARDS ARE GENERATED.

MAKE SURE THE DISHWASHER HAS BEEN CORRECTLY IN-

STALLED AND GROUNDED BY A QUALIFIED FITTER. THIS

SAFETY REQUIREMENT MUST BE MET. IN CASE OF DOUBT,

CALL IN A QUALIFIED FITTER. THE MANUFACTURER DE-

CLINES ALL RESPONSIBILITY FOR DAMAGE TO PERSONS

OR PROPERTY RESULTING FROM THE FAILURE TO GROUND

THE APPLIANCE OR FROM A DEFECTIVE GROUND CON-

NECTION .

BEFORE PROCEEDING WITH INSTALLATION, DISCONNECT

THE MAINS POWER SUPPLY FROM THE WORK AREA.

Only for free-standing models

It is strictly forbidden to mount a hob over a free-standing dishwasher. •

1 2 ... 61 62 63 64 65 66 67 68 69 70 71 ... 92 93

No comments

Smeg STA4645 User Manual Page 66