Smeg STA4645 User Manual download pdf (Page 70)

16 Rev 0.0

INSTALLATION INSTRUCTIONSEN

A through hole with a diameter of at least 8 cm (5/32”) is required to pass the

hoses and power cord (ref. A ﬁ g. 5-05).

Make sure there area no rough edges that could damage the power cord or

hoses. If the dishwasher is installed in a metal unit protect the edge of the

through hole for the hoses and power cord with a gasket. Do not use exten-

sion cords when making the electrical connection as these do not guarantee

safety.

ATTENTION!

INSTALLING THE DISHWASHER IN A NARROW SPACE MAY BEND

OR CRUSH THE POWER CORD. TAKE GREAT CARE IN ORDER TO

REDUCE THE POSSIBILITY OF DAMAGING THE POWER CORD

WHEN INSTALLING OR REMOVING THE APPLIANCE.

5.2.1 Connecting to the water supply

PREVENTING THE RISK OF CLOGGING OR DAMAGE: IF THE

WATER PIPE IS NEW OR HAS NOT BEEN USED FOR A LONG

TIME, BEFORE CONNECTING TO THE WATER SUPPLY CHECK

THAT THE WATER IS CLEAR AND FREE OF IMPURITIES, TO PRE-

VENT DAMAGE TO THE APPLIANCE. THE DISHWASHER MUST

ALWAYS BE CONNECTED TO THE WATER SYSTEM WITH

NEW HOSES; OLD OR USED HOSES MUST NEVER BE RE-

USED.

Fig. 5-05

1 2 ... 65 66 67 68 69 70 71 72 73 74 75 ... 92 93

No comments

Smeg STA4645 User Manual Page 70