Smeg STA4645 User Manual download pdf (Page 73)

Rev 0.0 19

INSTALLATION INSTRUCTIONS EN

5 .2.1.2 Connecting the drain hose

Connecting to a drain

Insert the relative hose into a drain with a minimum diameter of 4 cm (1-37/64”)

(ref. A ﬁ g. 5-09); alternatively, place the hose on the sink (ref. B ﬁ g. 5-09) using

the supplied hose support (see ﬁ g. 5-10), but taking care to avoid obstructions

or excessive curving. Make sure the hose cannot fall out. For this purpose, the

hose support is ﬁ tted with a hole (ref. A ﬁ g. 5-10) which can be used to ﬁ x it

to the wall or the tap with a piece of string. The free end must lie at a height

ranging from of 30 to 100 cm (from of 1-7/32” to 3-59/64”) (see ﬁ g. 5-09)

and must never be immerged in water. If horizontal extension hoses with a

maximum length of 3m are used, position the drain hose at a maximum height

of 85 cm (3-11/32”) above the ﬂ oor.

Fig. 5-09

min O4 cm

1-37/64”

min 30 cm

1-7/32”

MAX 100 cm

3-59/64”

Fig. 5-10

1 2 ... 68 69 70 71 72 73 74 75 76 77 78 ... 92 93

No comments

Smeg STA4645 User Manual Page 73