Smeg C7280NLD3P1 User Manual download pdf (Page 32)

Problem Possible cause Solution

Temperature cannot be set. The FastFreeze function

or Shopping function is

switched on.

Switch off FastFreeze or

Shopping manually, or wait

until the function resets auto‐

matically to set the tempera‐

ture. Refer to "Fast‐

Freezefunction" or "Shopping

function".

dEMo appears on the dis‐

play.

The appliance is in dem‐

onstration mode.

Keep the OK pressed for ap‐

proximately 10 seconds until a

long sound is heard and dis‐

play shuts off for a short time.

The temperature in the ap‐

pliance is too low/too high.

The temperature regulator

is not set correctly.

Set a higher/lower tempera‐

ture.

The door is not closed cor‐

rectly.

Refer to "Closing the door".

The food products' tem‐

perature is too high.

Let the food products temper‐

ature decrease to room tem‐

perature before storage.

Many food products are

stored at the same time.

Store less food products at the

same time.

The door has been

opened often.

Open the door only if necessa‐

ry.

The FastFreeze function

or Shopping function is

switched on.

Refer to "FastFreeze function"

or "Shopping function".

There is no cold air circu‐

lation in the appliance.

Make sure that there is cold

air circulation in the appliance.

If the advice does not lead to

the desired result, contact the

nearest Authorised Service

Centre.

Replacing the lamp

The appliance is equipped with a longlife

LED interior light.

Only service is allowed to replace the

lighting device. Contact your Authorised

Service Centre.

Closing the door

1. Clean the door gaskets.

2. If necessary, adjust the door. Refer to

assembly instructions.

3. If necessary, replace the defective

door gaskets. Contact the Authorised

Service Centre.

32

1 2 ... 27 28 29 30 31 32 33 34 35 36 37 ... 71 72

Comments to this Manuals

No comments