Smeg STA4645 User Manual download pdf (Page 16)

Rev 0.0 15

USER INSTRUCTIONS

5 TROUBLESHOOTING

The dishwasher can to signal a number of malfunctions by turning on various

indicator lights, as described below (see following table):

FAULT DESCRIPTION

Acquastop failure

The anti-ﬂ ooding system has tripped (only for models

ﬁ tted with this feature). Activates in case of water leaks.

Contact the technical assistance service.

Water heating malfunction

The water is not heated or is incorrectly heated.

Repeat the washing program; if the problem persists,

contact the technical assistance service.

Water temperature monitoring malfunction

Interrupt the current program. Switch off the

dishwasher, switch it back on again, program a new

cycle and press start. If the problem persists, contact

the technical assistance service.

Water intake malfunction

The appliance does not take in water or does so

incorrectly. Make sure the water connections are

correct, that the water supply tap is open and that the

ﬁ lter is not clogged. If the problem persists, contact

the technical assistance service.

Water pump-out malfunction

The appliance does not pump out the water or does

so incorrectly. Make sure the drain hose is not kinked

or crushed and that the siphon and ﬁ lters are not

clogged. If the problem persists, contact the technical

assistance service.

Tab. 4-01

Light off Light on Light ﬂ ashing

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 92 93

No comments

Smeg STA4645 User Manual Page 16