Smeg STA4645 User Manual download pdf (Page 48)

Rev 0.0 31

USER INSTRUCTIONS

5.2 Cleaning the water intake ﬁ lter

(only some models)

The water intake ﬁ lter (ref. B ﬁ g. 5-01) located at the outlet of the water supply

tap needs to be cleaned periodically. After having closed the water supply tap,

unscrew the end (ref. A ﬁ g. 5-01) of the water intake hose (use a pair of pliers,

if necessary), remove the ﬁ lter (ref. B ﬁ g. 5-01) and clean it delicately under

running water (at room temperature). Reassemble the ﬁ lter (ref. B ﬁ g. 5-01) in

its seat and carefully screw the water intake hose back into position (ref. A ﬁ g.

5-01) (use a pair of pliers, if necessary).

5.3 Cleaning the spray arms

The spray arms can be easily removed for periodic cleaning of the nozzles,

to prevent possible clogging. Wash them under running water (at room tem-

perature) and carefully replace them in their seats, checking that their rotary

movement is in no way impeded; if this is not the case, make sure they have

been mounted properly.

Removing the spray arms

To remove the upper spray arm (ref. A ﬁ g. 5-02), unscrew the locking ring

(ref. B ﬁ g. 5-02) by turning it clockwise. After cleaning, remount the spray

arm in its seat and tighten the locking ring by turning it anti-clockwise.

To remove the lower spray arm (moving version), simply grip it (see ﬁ g.

5-03) and lift it up. Then release the spray arm (ref. A ﬁ g. 5-04) from the duct

(ref. B ﬁ g. 5-04). After cleaning the spray arm, reattach it to the duct and put

the assembly back in its housing.

After remounting the spray arm, make sure it turns freely (spin it with

your hand a few times) and that the duct can move without obstruc-

tions.

•

Fig. 5-01

1 2 ... 43 44 45 46 47 48 49 50 51 52 53 ... 92 93

No comments

Smeg STA4645 User Manual Page 48