Smeg S3L100P User Manual download pdf (Page 20)

Problem Possible cause Solution

Water flows on the rear plate

of the refrigerator.

During the automatic defrost-

ing process, frost melts on

the rear plate.

This is correct.

Water flows into the refrigera-

tor.

The water outlet is clogged. Clean the water outlet.

Food products prevent that

water flows into the water

collector.

Make sure that food prod-

ucts do not touch the rear

plate.

Water flows on the floor. The melting water outlet is

not connected to the evapo-

rative tray above the com-

pressor.

Attach the melting water out-

let to the evaporative tray.

The temperature in the appli-

ance is too low/too high.

The temperature regulator is

not set correctly.

Set a higher/lower tempera-

ture.

The door is not closed cor-

rectly.

Refer to "Closing the door".

The food products' tempera-

ture is too high.

Let the food products tem-

perature decrease to room

temperature before storage.

Many food products are stor-

ed at the same time.

Store less food products at

the same time.

The door has been opened

often.

Open the door only if neces-

sary.

There is no cold air circula-

tion in the appliance.

Make sure that there is cold

air circulation in the appli-

ance.

If the advice does not lead to

the desired result, call the

nearest Authorized Service

Centre.

Replacing the lamp

Disconnect the plug from the mains socket.

1. Remove the screw from the lamp cover.

2. Remove the lamp cover (refer to the

illustration).

3. Replace the used lamp with a new lamp

of the same power and specifically

designed for household appliances (the

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 47 48

Comments to this Manuals

No comments

Smeg S3L100P User Manual Page 20

Comments to this Manuals

Related products and manuals for Freezers Smeg S3L100P